Peugeot 308 Key Fob Problems and How to Fix Them
If your Peugeot key fob suddenly stopped working, it could be because of an inoperative battery for the coin-cell or damaged receiver modules, water issues, or even a defective chip. Fortunately, these issues are easy to fix and you'll get your vehicle back to normal in no time!
Car keys can also get damaged because the blade of the key gets worn. You can fix this issue by visiting your local Car Key Man Auto Locksmith to replace the blade.
Battery
The key fob in your Peugeot 308 may die or become weak enough to not send a strong signal. The key fob could stop working and prevent you from locking or unlocking your doors, or even starting your engine. You'll need a replacement battery for the key fob in order to fix this.
You can purchase a new battery at an auto parts store, or at your local hardware store. Make peugeot 307 key replacement that the battery is brand new and not stored on the shelf too long. A brand new battery will have more capacity and will also be able to send a stronger signal to the car.
After replacing the battery After replacing the battery, try locking and unlocking the doors of your Peugeot by using the key fob. If the doors aren't unlocking then the receiver module inside the car is the cause. The local Peugeot dealer can reprogram the receiver module.
The internal chip of the key fob can also be damaged. This could happen if you drop your key fob on the ground or expose it to water. The rubber seals that shield the chip from moisture could become worn down over time particularly if the key fob is exposed to water for prolonged periods of time, such as submerging it in the ocean at the beach. To avoid this it is recommended to keep your key fob clear of the reach of moisture and away from water.
Water Damage
Don't lose hope on your key fob when it gets wet, whether you slipped into an aquisition or stumbled into a Puddle. The key fob is protected by rubber seals however, prolonged exposure to water can harm its electronic chip. Since water is such a good conductor so any water that gets inside the key fob may create a series of short circuits that will eventually ruin the chip. After taking the battery out, clean the contacts with isopropyl alcohol and dry it off completely before putting it back into.
A dead battery could be the reason that your Peugeot 308 won't start. Jumper cables are a fantastic way to restart the engine when you have an additional car. If the battery is the issue and it is not working, it should be replaced.
Another reason could be a malfunctioning receiver in the vehicle that could hinder it from receiving a signal from the key fob. It could be due to a issue with the antenna or wiring or the key fob may be damaged. It may be necessary to program a new keyfob for your vehicle if you are using one. If you are unable solve the issue, you should contact an expert technician. A skilled technician will be able to diagnose the problem quickly and resolve it in a timely manner.
Radio Interference
The signs of a key fobs that are not recognized or having a narrow range usually indicate that there is a problem with the system. The interference could be transmitted or radiated, the latter resulting from power and speaker cables getting too close to electrical components. In general, rerouting cables or moving them away from these components can solve the problem.
It's unlikely someone is listening to the key fob's signal in order to steal your vehicle, but it's possible that radio frequency interference has drowned out the signal. Fortunately, this is easy to fix.
If you're having issues with your key fob not being recognized, try a new battery. Also, make sure that the battery is of the right type and size. Batteries of the wrong dimensions can harm your battery.
Certain alarm systems and radar detectors use the same radio frequency as your key fob, which can cause them to interfere with your key signals. Avoid connecting these devices to your key fob.
Pairing Issues
The remote keyless entry system in a car has a receiver which receives radio frequencies from the key fob. If the receiver has developed problems, you won't be in a position to begin your vehicle regardless of whether the key fob is working and is reset. The issue can be caused by a variety of ways, including a dead battery in the coin-cell, or water damage. The receiver could also be malfunctioning due to a software error or internal damage to the key itself.
The coin battery in your Peugeot 308 keyfob has likely gone out of service. This battery can be easily replaced, but make sure that it is the correct battery for your key fob. It is best to use batteries that are the same size with the same voltage, specifications, and specifications as the original.
Another reason the reason your Peugeot 308 key fob might not be working is that it is connected to another vehicle. It is possible that you have accidentally given your key fob away to someone else or the key was used to unlock other vehicles. This can be solved by reprogramming your key fob with an OBDII scan. This tool will usually ask you for specific information about your vehicle, like the VIN or engine type, so it's important to enter this information correctly.